Excellence and Innovation
P 801 571-5247
E 1911grips@challis.com
  • To replace bushings when frame has stripped
  • Consider getting the tap shown at right to re-tap the frame
  • Easy to install and remove
  • Prevents loose grip screws
  • Secure grip mounting for improved performance
  • Be sure to use bushing O-rings shown at the right
Price: $19.99
$19.99
In Stock

    Quantity:
    Item #: B-R-FSS-4
    Availability: In Stock
    Usually ships In 1-2 Days

    Also Consider

    Bushing O-ring, 8 pieces bushing o-ring, challis o-ring, hex drive bushing o-ring, 1911 grip screw bushing o-ring, 1911 o-ring, challis bushing o-ring, 1911 grip, 1911 grips, colt 1911, wilson combat 1911, nighthawk 1911, 1911 bushing

    Bushing O-ring, 8 pieces

    Price: $2.99

    Grip Screw O-ring, 8 pieces grip screw o-ring,challis o-ring,hex drive o-ring,hex head o-ring, loose 1911 grip screw, 1911 loose screw, challis bushing o-ring, 1911 grip, 1911 grips, Colt 1911, Wilson Combat 1911, Nighthawk 1911

    Grip Screw O-ring, 8 pieces

    Price: $2.99

    Frame Repair Tap 1911 oversize bushing tap,challis bushing tap,oversize bushing, oversize grip bushing, oversize grip screw bushing, 1911 oversize tap, 1911 stripped threads, stripped bushing threads, 1911 grips

    Frame Repair Tap

    Price: $39.99

    Frame Repair Tap Guide 1911 oversize bushing tap,challis bushing tap,oversize bushing, oversize grip bushing, oversize grip screw bushing, 1911 oversize tap, 1911 stripped threads, stripped bushing threads, 1911 grips

    Frame Repair Tap Guide

    Price: $21.99

    Use when the bushing threads in frame have been stripped. Frame must be tapped with oversize threads before use. These bushings together with our Oversize Bushing Tap are the easiest and highest quality way to repair a stripped frame.

    These bushings are easy to install and remove. Loctite is not necessary for installation if they are torqued to the proper spec (27 in-lbs max for steel frames & 18 in-lbs max for aluminum). This full size bushing will work with grips not less than 0.245" thick.

    We strongly recommend O-rings because of the benefits they provide, such as preventing stripped threads, eliminating loose grip screws, scuffed frames and providing the most secure mounting available for the 1911. You can feel the difference.

    Overall Customer Rating of 11 Reviews:
    WI

    Well worth it!

    Rating:
    Pros:
    Cons:
    I was a little hesitant at first to purchase due to the price (not that the price is outta line it's just that parts in general are pricey these days and it's hard to justify) but now i wish I would have ordered them sooner. Not only did the repair bushing fix a stripped frame and bushing I had but the heads on these bushing are soooo much better than traditional bushing. Just stop putting it off and order them already. It's well worth the price.

    Wisconsin

    Saved the gun

    Rating:
    Pros:
    Cons:
    I have a Colt Defender that came with slim grips. I own a lot of government and commander sized 1911 so I am used to the standard size grips. when I went to swap out the bushings on the alloy frame one of the holes was stripped. This product made my original plan possible again.

    Full size oversize repair bushing

    Rating:
    Pros:
    Cons:
    Works great. I love the fact that you can properly torque these bushings without fear of damaging them. Used in conjunction with the tap and guide really bailed me out of a touchy situation not caused by me.

    North Carolina

    A LOT easier.......

    Rating:
    Pros:
    Cons:
    The hex drive is easier to properly torque than the old slotted type. GREAT improvement, does JMB know about this???

    Oversize Stainless Steel Grip Bushing

    Rating:
    Pros:
    Cons:
    These oversize bushing fit my stainless frame Springfield Armory perfectly. My 1911 grip bushing holes got stripped when removing them not long after I purchased the gun. The bushings were staked and the screws had been tightened too much at the factory. I lubricated these stainless steel bushings with specific stainless steel grease and then installed to torque specifications. Stainless has a tendency to gall so the grease is better than locktite. Nice product, it's a one of kind product thought Challis is the only one to make stainless bushings.