Product Reviews for Bushing O-ring, 24 pieces

Bushing O-ring, 24 pieces bushing o-ring, challis o-ring, hex drive bushing o-ring, 1911 grip screw bushing o-ring, 1911 o-ring,challis bushing o-ring, bushing o-ring, challis o-ring, hex drive bushing o-ring, 1911 grip screw bushing o-ring, 1911 o-ring, challis bushing o-ring, 1911 grip, 1911 grips, colt 1911, wilson combat 1911, nighthawk 1911, 1911 bushing

Bushing O-ring, 24 pieces (O-BU-24)

4.92 stars, based on 25 reviews

ONLY COMPATIBLE WITH CHALLIS BUSHINGS. These O-rings go around the Hex Drive Bushings and work together with the Grip Screw O-rings to give the best possible mounting for your grips. The system prevents the grips from shifting during...

← Return to product page

Show

Page:

of 5

< Prev

Next >

Reviews 21-25 of 25

pcar157

SE PA

O Rings and Grip Screws

2/9/2020

Rating:

Pros:

Cons:

I use only Challis bushing O rings, grip screw O rings and grip screws. Great product, consistent quality and great customer service. What's not to like???

Clark

O-rings work much better than loc-tite for me

7/2/2016

Rating:

Pros:

Cons:

Since I like to pull the grips off periodically when I'm cleaning, the bushing/grip-screw o-ring combination works quite well for me. I haven't noticed any loosening of grips after 50-100 rounds at the range (which I used to get constantly without o-rings).

Westridge1

The only ones

8/27/2018

Rating:

Pros:

Cons:

These are now the only ones I will use. They are the best!

T. Burba

Tightened right up

9/26/2016

Rating:

Pros:

Cons:

I had bought some accent hex screws that were slightly undersized. Not sure if I needed the o-rings for the screw or the grip. So I installed both. Grips are now nice and tight and don't slip.

Chuck

SW Montana

Work fine so far

9/20/2017

Rating:

Pros:

Cons:

Been shoveling 2 ft of snow instead of shooting, so time will tell if they help keep the grip screws from backing out

Page:

of 5

< Prev

Next >

Reviews 21-25 of 25